SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSCION2007TC BASE, AUTOMATICREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSAXLEAUTOMATIC TRANSAXLE SYSTEMDIAGNOSTIC TROUBLE CODE CHART
2007 Scion tC Base, Automatic

Diagnostic Trouble Code Chart

2007 Scion tC Base, AutomaticSECTION Diagnostic Trouble Code Chart

If a DTC is displayed during the DTC check, check the parts listed in the table below and proceed to the page given.

HINT:

  • *1: Comes on MIL (Malfunction Indicator Lamp) light up
  • *2: "DTC stored" mark means ECM memorizes the malfunction code if the ECM detects the DTC detection condition.
  • This DTC may be output when the clutch, brake and gear components etc. inside the automatic transmission are damaged.

AUTOMATIC TRANSAXLE SYSTEM 

DIAGNOSTIC TROUBLE CODE CHART

DTC Code Detection Item Trouble Area MIL*1 Memory*2
P0705  Transmission Range Sensor Circuit Malfunction (PRNDL Input)
  1. Open or short in park/neutral position switch circuit
  2. Park/neutral position switch
  3. ECM
 Comes on DTC stored
P0710  Transmission Fluid Temperature Sensor "A" Circuit
  1. Open or short in ATF temperature sensor circuit
  2. Transmission wire (ATF temperature sensor)
  3. ECM
 Comes on DTC stored
P0711  Transmission Fluid Temperature Sensor "A" Performance
  1. Transmission wire (ATF temperature sensor)
 Comes on DTC stored
P0712  Transmission Fluid Temperature Sensor "A" Circuit Low Input
  1. Short in ATF temperature sensor circuit
  2. Transmission wire (ATF temperature sensor)
  3. ECM
 Comes on DTC stored
P0713  Transmission Fluid Temperature Sensor "A" Circuit High Input
  1. Open in ATF temperature sensor circuit
  2. Transmission wire (ATF temperature sensor)
  3. ECM
 Comes on DTC stored
P0717  Turbine Speed Sensor Circuit No Signal
  1. Open or short in transmission revolution sensor NT (speed sensor NT) circuit
  2. Transmission revolution sensor NT (speed sensor NT)
  3. ECM
  4. Automatic transaxle assembly
 Comes on DTC stored
P0724  Brake Switch "B" Circuit High
  1. Short in stoplight switch circuit
  2. Stop light switch
  3. ECM
 Comes on DTC stored
P0741  Torque Converter Clutch Solenoid Performance (Shift Solenoid Valve DSL)
  1. Shift solenoid valve DSL remains open or closed
  2. Valve body is blocked
  3. Torque converter clutch
  4. Automatic transaxle (clutch, brake or gear etc.)
  5. Line pressure is too low
 Comes on DTC stored
P0746  Pressure Control Solenoid "A" Performance (Shift Solenoid Valve SL1)
  1. Shift solenoid valve SL1 remains open or closed
  2. Valve body is blocked
  3. Automatic transaxle (clutch, brake or gear etc.)
 Comes on DTC stored
P0748  Pressure Control Solenoid "A" Electrical (Shift Solenoid Valve SL1)
  1. Open or short in shift solenoid valve SL1 circuit
  2. Shift solenoid valve SL1
  3. ECM
 Comes on DTC stored
P0766  Shift Solenoid "D" Performance (Shift Solenoid Valve S4)
  1. Shift solenoid valve S4 remains open or closed
  2. Valve body is blocked
  3. Automatic transaxle (clutch, brake or gear, etc.)
 Comes on DTC stored
P0776  Pressure Control Solenoid "B" Performance (Shift Solenoid Valve SL2)
  1. Shift solenoid valve SL2 remains open or closed
  2. Valve body is blocked
  3. Automatic transaxle (clutch, brake or gear etc.)
 Comes on DTC stored
P0778  Pressure Control Solenoid "B" Electrical (Shift Solenoid Valve SL2)
  1. Open or short in shift solenoid valve SL2 circuit
  2. Shift solenoid valve SL2
  3. ECM
 Comes on DTC stored
P0793  Intermediate Shaft Speed Sensor "A"
  1. Open or short in transmission revolution sensor NC (speed sensor NC) circuit
  2. Transmission revolution sensor NC (speed sensor NC)
  3. ECM
 Comes on DTC stored
P0982  Shift Solenoid "D" Control Circuit Low (Shift Solenoid Valve S4)
  1. Short in shift solenoid valve S4 circuit
  2. Shift solenoid valve S4
  3. ECM
 Comes on DTC stored
P0983  Shift Solenoid "D" Control Circuit High (Shift Solenoid Valve S4)
  1. Open in shift solenoid valve S4 circuit
  2. Shift solenoid valve S4
  3. ECM
 Comes on DTC stored
P2714  Pressure Control Solenoid "D" Performance (Shift Solenoid Valve SLT)
  1. Shift solenoid valve SLT remains closed
  2. Valve body is blocked
  3. Automatic transaxle (clutch, brake or gear etc.)
 Comes on DTC stored
P2716  Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT)
  1. Open or short in shift solenoid valve SLT circuit
  2. Shift solenoid valve SLT
  3. ECM
 Comes on DTC stored
P2769  Torque Converter Clutch Solenoid Circuit Low (Shift Solenoid Valve DSL)
  1. Short in shift solenoid valve DSL circuit
  2. Shift solenoid valve DSL
  3. ECM
 Comes on DTC stored
P2770  Torque Converter Clutch Solenoid Circuit High (Shift Solenoid Valve DSL)
  1. Open in shift solenoid valve DSL circuit
  2. Shift solenoid valve DSL
  3. ECM
 Comes on DTC stored
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.