2006 Scion xA AutomaticFACTORY OEM SERVICE PROCEDURE

DTC P0116 Engine Coolant Temperature Circuit Range / Performance Problem: Description

Refer to DTC P0115  (see ).

DTC DETECTION CONDITION CHART

DTC No. DTC Detection Condition Trouble Area
P0116 When one of following conditions is met (2 trip detection logic):
  • When cold engine is started and engine is warmed up, Engine Coolant Temperature (ECT) sensor value does not change
  • When warmed up engine is started, driving does not change ECT sensor value
  • After a warmed up engine is started, if the ECT sensor value does not change when the engine is stopped and then the next cold engine start is performed, it is determined that a malfunction has occurred.
  • Thermostat
  • Engine Coolant Temperature (ECT) sensor
Chapter Navigation
Return to Chapter: DTC P0116 Engine Coolant Temperature Circuit Range / Performance Problem
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.