2006 Scion xA AutomaticFACTORY OEM SERVICE PROCEDURE

Torque Specifications

Brake actuator: 

TORQUE SPECIFICATIONS BRAKE ACTUATOR

Part Tightened N*m kgf*cm ft. *lbf
Brake actuator assembly x Brake actuator bracket 5.4 55 48 in. *lbf
Brake actuator assembly with bracket x Body 19 194 14
Brake actuator assembly x Brake tube (without SST) 15 155 11
Brake actuator assembly x Brake tube (with SST) 14 143 10

Front speed sensor: 

TORQUE SPECIFICATIONS FOR FRONT SPEED SENSOR

Part Tightened N*m kgf*cm ft. *lbf
Front speed sensor 8.0 82 71 in. *lbf

Skid control sensor: 

TORQUE SPECIFICATIONS FOR SKID CONTROL SENSOR

Part Tightened N*m kgf*cm ft. *lbf
Rear axle hub and bearing assembly (skid control sensor) x Body 61 622 45

Yaw rate sensor: 

TORQUE SPECIFICATIONS FOR YAW RATE SENSOR

Part Tightened N*m kgf*cm ft. *lbf
Yaw rate sensor x Body 14 143 10

Steering sensor: 

TORQUE SPECIFICATIONS FOR STEERING SENSOR

Part Tightened N*m kgf*cm ft. *lbf
Steering pad assembly x Steering wheel assembly 8.8 90 78 in. *lbf
Steering wheel assembly x Steering column shaft 50 510 37
Chapter Navigation
Return to Chapter: Brake Control System
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.