Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Scion xB StandardFACTORY OEM SERVICE PROCEDURE
Service Data
Ignition Service Data
| Spark plug | ||
| Recommended spark plug | DENSO made | K16R-U |
| NGK made | BKR5EYA | |
| Electrode gap | K16R-U, BKR5EYA | 0.7 to 0.8 mm (0.028 to 0.031 in.) |
| Camshaft position sensor | ||
| Resistance | Cold | 1, 630 to 2, 740 Ω |
| Hot | 2, 065 to 3, 225 Ω | |
| Crankshaft position sensor | ||
| Resistance | Cold | 985 to 1, 600 Ω |
| Hot | 1, 265 to 1, 890 Ω | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.