Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Scion xB AutomaticFACTORY OEM SERVICE PROCEDURE
Torque Specifications
FUEL TORQUE SPECIFICATIONS
| Part Tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Fuel delivery pipe sub-assy at Cylinder head sub-assy (See REPLACEMENT ) | Bolt A | 19 | 194 | 14 |
| B | 9.0 | 92 | 80 in.lbf | |
| Cylinder head cover sub-assy at Cylinder head sub-assy (See REPLACEMENT ) | 10 | 102 | 7 | |
| Cylinder head cover No. 2 at Cylinder head cover sub-assy | 7.0 | 71 | 62 in.lbf | |
| Ignition coil No. 1 at Cylinder head cover sub-assy | 9.0 | 92 | 80 in.lbf | |
| Rear Seat Cushion support bracket sub-assy RH at Floor | 5.0 | 51 | 44 in.lbf | |
| Fuel tank vent tube set plate at Fuel tank assy | 6.0 | 61 | 53 in.lbf | |
| Fuel tank assy at Body | 32 | 326 | 24 | |
| Parking brake cable sub-assy No. 3 at Body | 5.4 | 55 | 48 in.lbf | |
| Parking brake cable sub-assy No. 2 at Body | 5.4 | 55 | 48 in.lbf | |
| Exhaust manifold at Exhaust pipe assy front | 43 | 438 | 32 | |
| Exhaust pipe assy at Exhaust tail pipe assy | 32 | 326 | 24 | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.