Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2005 Scion tC StandardFACTORY OEM SERVICE PROCEDURE

Inspection Procedure

CHECK MANUAL UP/DOWN FUNCTION (PASSENGER SIDE)
1. Check that the power window manual UP/DOWN function operates normally.
NG: OTHER PROBLEM (See MANUAL UP/DOWN FUNCTION DOES NOT OPERATE ON PASSENGER SIDE ONLY )

OK: GO TO NEXT STEP
CHECK LAMP OF POWER WINDOW REGULATOR SWITCH (PASSENGER SIDE)
1. Turn the ignition switch ON.
2. Operate the power window regulator switch.
3. Check the blinking pattern of the lamp as shown in Fig 2 .
  1. If pattern (1) or (3) is displayed, proceed to A.
  2. If pattern (2) is displayed, proceed to B.
  3. If the normal pattern is displayed, proceed to C.
Fig 1: Identifying Lamp Of Power Window Regulator Switch (Passenger Side)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Chapter Navigation

Return to Chapter: Auto Up/Down Function Does Not Operate On Passenger Side

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.