How To Proceed With Troubleshooting

HINT:

Use this procedure to troubleshoot the power window control system.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT: GO TO NEXT STEP 

2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK (See  CUSTOMER PROBLEM ANALYSIS CHECK   ) 

   NEXT: GO TO NEXT STEP 

3. (See  PROBLEM SYMPTOMS TABLE   ) 

   Result: 

   PROBLEM SYMPTOMS
   
   

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

   B: Go to step   5 

   A: GO TO NEXT STEP 

4. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. (See TERMINALS OF ECU  )
   2. (See ON-VEHICLE INSPECTION )
   3. (See INSPECTION )

   NEXT: GO TO NEXT STEP 

5. ADJUST, REPAIR OR REPLACE 

   NEXT: GO TO NEXT STEP 

6. RESET POWER WINDOW MOTOR (See  INITIALIZATION  ) 
   1. If the AUTO switch lamp of the power window switch is blinking after the repair, reset the power window motor (See INITIALIZATION ).

   NEXT: GO TO NEXT STEP 

7. CONFIRMATION TEST 
8. NEXT: END