2005 Scion tC AutomaticFACTORY OEM SERVICE PROCEDURE

Torque Specifications

2AZ-FE: 

FUEL TORQUE SPECIFICATIONS (2AZ-FE)

Part Tightened N.m kgf.cm ft.lbf
Battery negative terminal x Battery 5.4 55 48 in.lbf
Fuel delivery pipe sub-assy x Cylinder head sub-assy 20 205 15
Fuel pressure pulsation damper assy x Fuel delivery pipe sub-assy 9.0 90 80 in.lbf
Fuel tank vent tube set plate x Fuel tank assy 6.0 60 53 in.lbf
Fuel tank protector plate x Fuel tank assy 6.0 60 53 in.lbf
Fuel tube clamp No. 4 x Fuel tank assy 6.0 60 53 in.lbf
Fuel tank band No. 1 RH x Body 63.5 645 47
Fuel tank band No. 1 LH x Body 63.5 645 47
Rear suspension brace lower RH x Body 63.5 645 47
Rear suspension brace lower LH x Body 63.5 645 47
Fuel tank protector No. 1 x Body 5.4 55 48 in.lbf
Fuel tank protector No. 1 x Fuel tank band No. 1 RH 5.4 55 48 in.lbf
Fuel tank protector No. 1 x Fuel tank band No. 1 LH 5.4 55 48 in.lbf
Exhaust pipe assy center x Exhaust pipe assy front 43 440 32
Exhaust pipe assy center x Exhaust pipe assy tail 43 440 32
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.