2004 Scion xB AutomaticFACTORY OEM SERVICE PROCEDURE

Torque Specification

TORQUE SPECIFICATION

Part Tightened N.m kgf.cm ft.lbf
Bleeder plug 8.3 85 73 in.lbf
Brake booster clevis lock nut 26 265 19
Brake pedal support sub-assy x Brake pedal sub-assy 37 375 27
Brake booster x Body 13 130 9
Brake pedal support sub-assy x Body 21 214 15
Brake master cylinder x Piston stopper bolt 10 102 7
Brake master cylinder x Brake booster 13 127 9
Brake line union nut 15 155 11
Wheel nut 103 1,050 76
Front brake cylinder mounting x Steering knuckle 88 900 65
Front brake cylinder x Front brake cylinder mounting 34 347 25
Front disc brake caliper x Flexible hose 29 296 21
Rear drum brake wheel cylinder x Backing plate 9.8 100 87 in.lbf
Brake actuator assy x Actuator bracket 5.4 55 48 in.lbf
Brake actuator bracket x Body 19 194 14
Front speed sensor x Steering knuckle 8.0 82 71 in.lbf
Front speed sensor wire harness clamp x Shock absorber 29 296 21
Front speed sensor wire harness clamp x Body 8.0 82 71 in.lbf
Yaw rate sensor x Body 14 143 10
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.