Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Scion xA AutomaticFACTORY OEM SERVICE PROCEDURE
Definition Of Terms
DEFINITION OF TERMS
| Term | Definition |
|---|---|
| Monitor Description | Description Of What The ECM Monitors And How It Detects Malfunctions (Monitoring Purpose And Its Details). |
| Related DTCs | Diagnostic Code |
| Typical Enabling Condition | Preconditions That Allow The ECM To Detect Malfunctions. With All Preconditions Satisfied, The ECM Sets The DTC When The Monitored Value(S) Exceeds The Malfunction Threshold(S). |
| Sequence Of Operation | The Priority Order That Is Applied To Monitoring, If Multiple Sensors And Components Are Used To Detect The Malfunction. While Another Sensor Is Being Monitored, The Next Sensor Or Component Will Not Be Monitored Until The Previous Monitoring Has Concluded. |
| Required Sensor/Components | The Sensors And Components That Are Used By The ECM To Detect Malfunctions. |
| Frequency Of Operation | The Number Of Times That The ECM Checks For Malfunctions Per Driving Cycle. "Once Per Driving Cycle" Means That The ECM Detects Malfunction Only One Time During A Single Driving Cycle. "Continuous" Means That The ECM Detects Malfunction Every Time When Enabling Condition Is Met. |
| Duration | The Minimum Time That The ECM Must Sense A Continuous Deviation In The Monitored Value(S) Before Setting A DTC. This Timing Begins After The "Typical Enabling Conditions" Are Met. |
| Malfunction Thresholds | Beyond This Value, The ECM Will Conclude That There Is A Malfunction And Set A DTC. |
| MIL Operation | MIL Illumination Timing After A Defect Is Detected. "Immediately" Means That The ECM Illuminates Mil The Instant The ECM Determines That There Is A Malfunction. "2 Driving Cycle" Means That The ECM Illuminates Mil If The Same Malfunction Is Detected Again In The 2nd Driving Cycle. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.