Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Scion xA AutomaticFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Part Tightened | N.m | Kgf.cm | Ft.Lbs | |
|---|---|---|---|---|
| Fuel Delivery Pipe Sub-Assy At Cylinder Head Sub-Assy (See FUEL INJECTOR ASSY ) | ||||
| Bolt A | 19 | 194 | 14 | |
| Bolt B | 9.0 | 92 | 80 in.lbf | |
| Cylinder Head Cover Sub-Assy At Cylinder Head Sub-Assy. See FUEL INJECTOR ASSY ) | 10 | 102 | 7 | |
| Cylinder Head Cover No. 2 At Cylinder Head Cover Sub-Assy | 7.0 | 71 | 62 in.lbf | |
| Ignition Coil No. 1 At Cylinder Head Cover Sub-Assy | 9.0 | 92 | 80 in.lbf | |
| Fuel Tank Bent Tube Set Plate At Fuel Tank Assy | 6.0 | 61 | 53 in.lbf | |
| Fuel Tank Assy At Body | 32 | 326 | 24 | |
| Parking Brake Cable Sub-Assy No. 3 At Body | 5.4 | 55 | 48 in.lbf | |
| Parking Brake Cable Sub-Assy No. 2 At Body | 5.4 | 55 | 48 in.lbf | |
| Exhaust Manifold At Exhaust Pipe Assy Front | 43 | 438 | 32 | |
| Exhaust Pipe Assy At Exhaust Tail Pipe Assy | 32 | 326 | 24 | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.