2010 Saturn Sky Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.50 OZS. 0.13 L PAG 46 S
Air Cond Refrigerant 1.03 LBS. 0.46 KG R-134a S
Automatic Transmission Fluid Complete Overhaul 10.50 QTS. 9.93 L Automatic Transmission Fluid DEXRON VI S
Automatic Transmission Fluid Dry 11.20 QTS. 10.59 L Automatic Transmission Fluid DEXRON VI S
Automatic Transmission Fluid Pan Removal & Filter Replacement 6.70 QTS. 6.34 L Automatic Transmission Fluid DEXRON VI S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Rear,Drain and Refill,w/Cover Removal 1.27 QTS. 1.2 L SAE 75W-90 Synthetic Axle Lubricant Add 3.38 oz. of Limited Slip Additive. S
Differential Gear Oil Rear,Drain and Refill,w/Drain Plug 1.06 QTS. 1 L SAE 75W-90 Synthetic Axle Lubricant Add 2.37 oz. of Limited Slip Additive. S
Engine Coolant 2.4L Eng,Automatic Trans 8.70 QTS. 8.23 L 50/50 mixture of DEX-COOL and clean, drinkable water All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Engine Oil 2.4L Eng w/Filter 5.00 QTS. 4.73 L API - SAE 5W-30 Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. S
Fuel Tank 13.60 GALS. 51.48 L S
Manual Transmission Fluid 2.75 QTS. 2.6 L Manual Transmission Fluid GM Part No. 89021806. S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 89021184. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid When using concentrated washer fluid, follow the fluid manufacturer's instructions for adding water. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.