Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2009ASTRA XR, 4D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSISGENERAL INFORMATIONRESET PROCEDURESPROGRAMMING AND SETUPREPAIR INSTRUCTIONSTIRE PRESSURE INDICATOR RECEIVER PROGRAMMING AND SETUPTIRE PRESSURE INDICATOR RECEIVER REPLACEMENT/REPROGRAMMING
2009 Saturn Astra XR, 4D Hatchback, Automatic
Tire Pressure Indicator Receiver Replacement/Reprogramming
2009 Saturn Astra XR, 4D Hatchback, AutomaticSECTION Tire Pressure Indicator Receiver Replacement/Reprogramming
When the tire pressure indicator receiver is replaced, the following procedures must be performed:
- With a scan tool, perform the Reset ECU before removing the tire pressure indicator receiver.
- After replacement, with a scan tool, perform the Program ECU and follow the screen prompts.
- Upon programming completion, test drive the vehicle above 32 km/h (20 mph) until the scan tool Learn Status data parameter is displayed as Completed.
The tire pressure monitor system should now be functioning properly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.