Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Saturn Astra XE, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 1.00 LBS. | 0.45 KG | R-134a | S | |||
| Automatic Transmission Fluid | Drain and Refill | 4.20 QTS. | 3.97 L | Automatic Transmission Fluid | GM Part No. 22689186. | S | |
| Automatic Transmission Fluid | Overhaul | 7.60 QTS. | 7.19 L | Automatic Transmission Fluid | GM Part No. 22689186. | S | |
| Brake Fluid | N/A | N/A | Hydraulic Brake Fluid, Super DOT 4 Brake Fluid | S | |||
| Engine Coolant | Automatic Trans | 6.20 QTS. | 5.86 L | 50/50 mixture of DEX-COOL Coolant and clean, drinkable water | S | ||
| Engine Oil | w/Filter | 4.80 QTS. | 4.54 L | API- SAE 5W-30 | GM Standard GM6094M and displays the American Petroleum Institute Certified for Gasoline Engines starburst symbol. If your vehicle is operated in an area where the temperature falls below -29Deg.C (-20Deg.F), consider using a SAE 0W-40 oil, it will provide easier cold starting and better protection for the engine at extremely low temperatures. | S | |
| Fuel Tank | 11.90 GALS. | 45.04 L | S | ||||
| Manual Transmission Fluid | 1.69 QTS. | 1.59 L | Manual Transmission Fluid | GM Part No. 88862473. | S | ||
| Power Steering Fluid | N/A | N/A | GM Power Steering Fluid | GM Part No. 88901976. | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Washer Solvent. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.