2007 Saturn Relay 3.9 1FACTORY OEM SERVICE PROCEDURE

A/T Shift Lock Control Solenoid

WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: A/T Shift Lock Control Solenoid Connector End View
GM280768Courtesy of GENERAL MOTORS CORP.
Shift Lock Control Connector Parts Information

Connector Part Information 
  • OEM: 12052832
  • Service: 12101825
  • Description: 2-Way F Metri-Pack 150 Series (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
A/T Shift Lock Control Solenoid Connector Terminal Identification

Pin Wire Circuit No. Function
A 0.35 D-GN/WH 1135 A/T Shift Lock Control
B 0.35 BK 750 Ground
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.