Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Saturn Relay 3.9 1FACTORY OEM SERVICE PROCEDURE
Body Control Module (BCM) X5 (WDA)
WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM) X5 (WDA) Connector Parts Information
Connector Part Information
|
Terminal Part Information
|
Body Control Module (BCM) X5 (WDA) Connector Terminal Identification
| Pin | Wire | Circuit No. | Function |
|---|---|---|---|
| 1 | 0.8 YE | 18 | Left Rear Stop/Turn Lamp Supply Voltage (WDA) |
| 0.8 YE | 18 | Left Rear Stop/Turn Lamp Supply Voltage (W49) | |
| 2 | 0.8 D-GN | 19 | Right Rear Stop/Turn Lamp Supply Voltage (W49) |
| 0.8 D-GN | 19 | Right Rear Stop/Turn Lamp Supply Voltage | |
| 3 | - | - | Not Used |
| 4 | 0.8 L-BU/WH | 1314 | Left Turn Signal Indicator Lamp Supply Voltage (W49) |
| 1 L-BU/WH | 1314 | Left Turn Signal Indicator Lamp Supply Voltage | |
| 5 | 0.8 L-BU | 1320 | Stop Lamp Supply Voltage |
| 6 | 0.5 WH | 17 | Stop Lamp Supply Voltage |
| 0.5 WH | 17 | Stop Lamp Supply Voltage (W49) | |
| 7 | - | - | Not Used |
| 8 | 0.35 PK | 5076 | Current Sensor Supply Voltage |
| 9 | 0.35 WH | 5075 | Current Sensor Signal |
| 10 | 0.35 BN | 5077 | Current Sensor Low Reference |
| 11 | 0.35 D-GN | 5706 | Front Passenger Heated Seat Switch Back LED (E69) |
| 12 | - | - | Not Used |
| 13 | 0.35 OG | 300 | Power Mode |
| 14 | 0.35 WH | 2283 | Rear Wiper/Washer Switch Supply Voltage |
| 15 | 0.35 PU | 5531 | Hood Closed Switch Signal (AP3/AP8) |
| 16 | 0.5 OG/BK | 233 | Park Brake Switch Signal |
| 17 | - | - | Not Used |
| 18 | 0.35 TN | 28 | Horn Relay Control |
| 19 | - | - | Not Used |
| 20 | 0.35 GY | 91 | Windshield Wiper Switch Signal 2 |
| 21 | 0.35 TN | 860 | Front Windshield Wiper Switch High Signal |
| 22 | - | - | Not Used |
| 23 | 0.35 PK/WH | 1970 | Headlamp Low Beam Relay Control |
| 24 | 0.35 WH | 1080 | Park Lamp Relay Control |
| 25 | - | - | Not Used |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
