2007 Saturn Relay 3.9 1FACTORY OEM SERVICE PROCEDURE

Memory Seat Control Module Replacement

Fig 1: Identifying Memory Seat Control Module
GM1527363Courtesy of GENERAL MOTORS CORP.
Memory Seat Control Module Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .
  2. Remove the seat cushion cover and pad. Refer to Seat Cushion Cover and Pad Replacement - Front .
1 Memory Seat Module
Refer to Control Module References for programming and setup information.
2 Memory Seat Module Bracket Screw (Qty: 3)
NOTE: Refer to Fastener Notice .

Tighten:Β  2 N.m (18 lb in)

3 Memory Seat Module Bracket
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.