Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2007OUTLOOK V6-3.6LREPAIR AND DIAGNOSISLIGHTING AND HORNSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL DATA DEFINITIONS
2007 Saturn Outlook V6-3.6L
Scan Tool Data Definitions
2007 Saturn Outlook V6-3.6LSECTION Scan Tool Data Definitions
SCAN TOOL DATA DEFINITIONS
BCM SCAN TOOL DATA DEFINITIONS
The BCM Scan Tool Data Definitions contains a brief description of all Lighting System related BCM parameters available on the scan tool.
BRAKE PEDAL DATA LIST
Stop Lamp Relay Command: The scan tool displays ON/OFF. When the BCM detects the stop lamps are applied, the scan tool will display ON.
BCM DATA LIST
Stop Lamp Switch Status: The scan tool displays volts (counts). The voltage level (counts) varies as the brakes are applied.
BCM INPUTS
Ambient Light Sensor C67-HVAC Manually equipped vehicles only: The Ambient Light sensor inputs the light level status to the BCM. The daylight light levels are Day/Night/Unknown/Invalid.
Ambient Light Sensor C67-HVAC Manually equipped vehicles only: The Ambient Light Sensor defines the light level to a voltage between 0 to 5 volts.
Flash to Pass: The scan tool displays Active/Inactive. When the multifunction switch is placed on the FTP position, the scan tool will display Active.
Front Fog Lamp Switch: The scan tool displays Active/Inactive. When the fog lamp switch is placed in the ON position, the scan tool will display Active.
Hazard Lamp Switch: The scan tool displays Active/Inactive. When the hazard switch is placed in the ON position, the scan tool will display ON.
Headlamp Switch: The scan tool displays Active/Inactive. When the headlamp switch is placed in the ON position, the scan tool will display ON.
Headlamp OFF Switch: The scan tool displays ON/OFF. When the headlamp switch is placed in the OFF position, the scan tool will display ON.
High Beam Select Switch: The scan tool displays ON/OFF. When the headlamp dimmer switch is placed in the HIGH position, the scan tool will display ON.
Left Turn Signal Switch: The scan tool displays Inactive/Active. When the turn signal switch is placed in the LEFT turn position, the scan tool will display Active.
Left Front Turn Signal: The scan tool displays ON/OFF. When the left front turn signal is placed in the ON position, the scan tool will display ON.
Left Rear Turn Signal: The scan tool displays ON/OFF. When the left rear turn signal is placed in the ON position, the scan tool will display ON.
Low Beam Relay Command: The scan tool displays ON/OFF. When the headlamp dimmer switch is placed in the LOW position, the scan tool will display ON.
Park Lamp Relay Command: The scan tool displays ON/OFF. When the headlamp switch is in the PARK position, the scan tool will display ON.
Park Lamp Switch: The scan tool displays ON/OFF. When the headlamp switch is in the PARK position, the scan tool will display ON.
Right Turn Signal Switch: The scan tool displays Inactive/Active. When the turn signal switch is placed in the right turn position, the scan tool will display Active.
BCM OUTPUTS
Backup Lamps: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the backup lamps are turned ON.
DRL Relay Command: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the DRL lamps are turned ON.
Front Fog Lamp Relay Command: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the fog lamps are turned ON.
High Beam Relay Command: The scan tool displays ON/OFF. When the turn signal multi-function switch is placed in the High Beam position, the scan tool will display ON.
LF Turn Signal Lamp: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the left front turn signal is turned ON.
LR Turn Signal Lamp: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the left rear turn signal is turned ON.
Low Beam Relay Command: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the low beam headlamps are turned ON.
Park Lamp Relay: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the park lamps are turned ON.
RF Turn Signal: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the right front turn signal is turned ON.
RR Turn Signal: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the right rear turn signal is turned ON.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.