Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2006ION L4-2.0L SC VIN PREPAIR AND DIAGNOSISTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGVEHICLE PERSONALIZATION
2006 Saturn ION L4-2.0L SC VIN P
Vehicle Personalization
2006 Saturn ION L4-2.0L SC VIN PSECTION Vehicle Personalization
VEHICLE PERSONALIZATION
PROGRAMMING FEATURES WITH TECH 2
ENTER PROGRAMMING
To enter Programming with the Tech 2, perform the following actions:
1. Install the scan tool.
2. Turn ON the ignition with the engine OFF.
3. Select the correct vehicle and model year.
4. Select F0: Body Control Module
5. Select F2: Special Functions
6. Select F2: Personalization
SETTING OPTIONS
Select an option with the UP/DOWN ARROW keys. The selected option will be highlighted. Use the SIDE TO SIDE ARROW keys to activate or deactivate the highlighted options, an ASTERISK will be displayed when an option has been ACTIVATED. Use the SOFT keys to save the selected options or use the EXIT key to leave the options unchanged. After all options have been selected press the SOFT key to continue.
The following is a list of the selectable options:
- F0: CTD Operation
- F1: Door Lock Operation
- F2: Fob Feedback
CTD OPERATION
Refer to Content Theft Deterrent (CTD) Description and Operation in Theft Deterrent for information.
DOOR LOCK OPERATION
Automatic Door Lock and Automatic Door Unlock can be enabled or disabled with the Tech 2.
FOB FEEDBACK
Refer to Keyless Entry System Description and Operation in Keyless Entry for information.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.