2005 Saturn Relay FWDFACTORY OEM SERVICE PROCEDURE

Fuel Pump and Sender Assembly

Fig 1: Fuel Pump and Sender Assembly Connector End View
GM684908Courtesy of GENERAL MOTORS CORP.
Engine Controls Connector End Views

Connector Part Information 
  • OEM: 15326631
  • Service: 15306360
  • Description: 4-Way F GT 280 Series Sealed 5.8 (BK)
Terminal Part Information 
  • Terminal: 15304719/Tray 19
  • Core/Insulation Crimp: E/5
  • Release Tool/Test Probe: 15315247/J-35616-4A
Fuel Pump and Sender Assembly

Pin Wire Color Circuit No. Function
A BK 1850 Ground
B PU 1589 Fuel Level Sensor Signal
C TN 2759 Low Reference
D GY 120 Fuel Pump Supply Voltage
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.