2005 Saturn Relay AWDFACTORY OEM SERVICE PROCEDURE

Trim Height Specifications

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Trim Height Specifications

Model Suspension Tire Size Engine Z D J K
1ZS69, 1ZT69 FE0 P 205/65R15 L61, LX9 71 mm (2.8 in) 174 mm (6.85 in) 229 mm (9 in) 234 mm (9.21 in)
1ZS69, 1ZU69 FE0 P 215/60R16 L61, LX9 67 mm (2.64 in) 169 mm (6.65 in) 236 mm (9.29 in) 240 mm (9.45 in)
1ZS68, 1ZT68, 1ZU68 FE0 P 215/60R16 LX9 68 mm (2.68 in) 171 mm (6.73 in) 236 mm (9.29 in) 240 mm (9.45 in)
2ZG69 FE0 P 215/60R16 LX9 -1 mm (-0.03 in) 15 mm (0.59 in) 235 mm (9.25 in) 251 mm (9.88 in)
2ZH69 FE2 P 225/50R17 LX9 -15 mm (-0.59 in) 4 mm (0.16 in) 225 mm (8.86 in) 241 mm (9.49 in)
All measurements taken with a full tank of gas.
All measurements have a tolerance of +/- 10 mm (0.39 in).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.