2005 Saturn Relay AWDFACTORY OEM SERVICE PROCEDURE

On-Board Diagnostic Features

The Sit-N-Lift mobility seat module is capable of storing diagnostic trouble codes. The module emits an audible tone that indicates the diagnostic trouble codes stored by the module. The DTCs are 2 digit codes and the codes are represented by the number of tones for each digit of the code number. For example a DTC 11 is represented with the following sequence: tone, pause, tone, long pause. The diagnostic mode is entered by opening right side door and pressing the door ajar switch 5 times in approximately 4 seconds. The module will immediately begin to flash codes refer to Diagnostic Trouble Code (DTC) List, a code 11 indicates OK. The DTCs will continue to be repeated in this manner until the on-board diagnostics are exited. Diagnostic trouble codes are cleared from the modules memory by removing the main power supply to the module such as the 25 amp circuit breaker or ground for several seconds. To exit the diagnostic mode press the door ajar switch one time.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.