Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Saturn Vue Red Line, AWDFACTORY OEM SERVICE PROCEDURE
Shift Speed
Shift Speed
| - | % of TPS | TPS Voltage | km/h | mph |
|---|---|---|---|---|
| 1st - 2nd | 7.5 | 0.8V | 15-17 km/h | 9-11 mph |
| 44 | 2.25V | 43-47 km/h | 27-29 mph | |
| 100 | 4.5V | 64-70 km/h | 40-43 mph | |
| 2nd-3rd | 7.5 | 0.8V | 31-34 km/h | 19-21 mph |
| 44 | 2.25V | 71-77 km/h | 44-48 mph | |
| 100 | 4.5V | 107-113 km/h | 66-70 mph | |
| 3rd-4th | 7.5 | 0.8V | 41-47 km/h | 25-29 mph |
| 44 | 2.25V | 103-109 km/h | 64-68 mph | |
| 100 | 4.5V | 163-169 km/h | 101-105 mph | |
| 4th-5th | 7.5 | 0.8V | 72-78 km/h | 45-48 mph |
| 44 | 2.25V | 136-142 km/h | 84-88 mph | |
| 100 | 4.5V | - | - | |
| TCC Applied | 7.5 | 0.8V | 78-82 km/h | 48-51 mph |
| 44 | 2.25V | 143-149 km/h | 89-93 mph | |
| 100 | 4.5V | 213-219 km/h | 132-136 mph | |
| TCC OFF | 7 | 0.75V | 73-77 km/h | 45-48 mph |
| 44 | 2.25V | 126-132 km/h | 78-82 mph | |
| 100 | 4.5V | 193-199 km/h | 120-124 mph | |
| 5th-4th | 7 | 0.75V | 58-62 km/h | 36-39 mph |
| 44 | 2.25V | 103-109 km/h | 64-68 mph | |
| 100 | 4.5V | - | - | |
| 4th-3rd | 7 | 0.75V | 27-31 km/h | 17-19 mph |
| 44 | 2.25V | 66-72 km/h | 41-45 mph | |
| 100 | 4.5V | 142-148 km/h | 88-92 mph | |
| 3rd-2nd | 7 | 0.75V | 15-17 km/h | 9-11 mph |
| 44 | 2.25V | 36-42 km/h | 22-26 mph | |
| 100 | 4.5V | 93-99 km/h | 58-61 mph | |
| 2nd-1st | 7 | 0.75V | 15-17 km/h | 9-11 mph |
| 44 | 2.25V | 15-17 km/h | 9-11 mph | |
| 100 | 4.5V | 47-53 km/h | 29-33 mph | |
| Transmission RPO | MJ7, MJ8 | |||
| Engine RPO | L66 | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
