2004 Saturn Vue Red Line, AWDFACTORY OEM SERVICE PROCEDURE

Fastener Tightening Specifications

Fastener Tightening Specifications

Application Specification
Metric English
Accelerator Pedal Position (APP) Assembly Bracket Fastener 25 N.m 18 lb ft
Air Cleaner Assembly Fastener 10 N.m 89 lb in
Air Cleaner Inlet Duct Fastener 10 N.m 89 lb in
Air Cleaner Outlet Resonator Duct Clamp 4 N.m 35 lb in
Air Cleaner Outlet Resonator Duct Fastener 10 N.m 89 lb in
Camshaft Position (CMP) Sensor Fastener 4 N.m 35 lb ft
Crankshaft Position (CKP) Sensor Fastener 9.8 N.m 88 lb in
Engine Coolant Temperature (ECT) Sensor 18 N.m 13 lb ft
Evaporative Emission (EVAP) Canister Purge Valve Fastener 9.8 N.m 88 lb in
EVAP Canister Support Cover Fastener 8 N.m 71 lb in
Exhaust Gas Recirculation (EGR) Valve 22 N.m 16 lb ft
Fuel Filler Pipe Bracket Fastener-Lower 10 N.m 89 lb in
Fuel Filler Pipe Bracket Fastener-Upper 2.5 N.m 17 lb in
Fuel Rail Fastener 9.8 N.m 87 lb in
Fuel Rail Inlet Pipe Fastener 9.8 N.m 87 lb in
Fuel Tank Retaining Strap Fastener 25 N.m 18 lb ft
Heated Oxygen Sensor (HO2S) 1 44 N.m 32 lb ft
Heated Oxygen Sensor (HO2S) 2 44 N.m 32 lb ft
Ignition Coil Fastener 12 N.m 8.8 lb ft
Intake Air Temperature (IAT) Sensor 2 18 N.m 13 lb ft
Intake Manifold Cover Fasteners 12 N.m 8.8 lb ft
Knock Sensor (KS) Nut 31 N.m 16 lb ft
Manifold Absolute Pressure (MAP) Sensor Fastener 4 N.m 35 lb in
Negative Battery Cable Terminal Retainer Fastener 17 N.m 13 lb ft
Positive Crankcase Ventilation (PCV) Valve Bolt 12 N.m 8.8 lb ft
Powertrain Control Module (PCM) Mounting Fastener 12 N.m 8.8 lb ft
Rocker Arm Oil Control Solenoid Valve Bolt 12 N.m 8.8 lb ft
Rocker Arm Oil Pressure Switch 22 N.m 16 lb ft
Spark Plug 18 N.m 13 lb ft
Throttle Body Fasteners 22 N.m 16 lb ft
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.