Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Saturn Vue Base, 2.2 D, AWDFACTORY OEM SERVICE PROCEDURE
Engine Controls Connector End Views
Accelerator Pedal Position (APP) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | PU | 1272 | 5 Volt Reference - A |
| B | L-BU | 1162 | APP Sensor 2 Signal |
| C | TN | 1274 | Low Reference |
| D | BN | 1271 | Low Reference |
| E | D-BU | 1161 | APP Sensor 1 Signal |
| F | WH/BK | 1164 | 5 Volt Reference - B |
Crankshaft Position (CKP) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | PU | 574 | Low Reference |
| B | YE | 573 | CKP Sensor Signal |
Engine Coolant Temperature (ECT) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | BK | 2761 | Low Reference |
| B | YE | 410 | ECT Sensor Signal |
Evaporative Emission (EVAP) Canister Purge Solenoid Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | WH | 5291 | Ignition 1 Voltage |
| B | D-GN/WH | 428 | EVAP Canister Purge Solenoid Control |
Evaporative Emission (EVAP) Canister Vent Solenoid Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | WH | 5291 | Ignition 1 Voltage |
| B | WH | 1310 | EVAP Canister Vent Solenoid Control |
Fuel Injector 1 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | PK | 39 | Ignition 1 Voltage |
| B | BK | 1744 | Fuel Injector 1 Control |
Fuel Injector 2 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | PK | 39 | Ignition 1 Voltage |
| B | L-GN/BK | 1745 | Fuel Injector 2 Control |
Fuel Injector 3 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | PK | 39 | Ignition 1 Voltage |
| B | PK/BK | 1746 | Fuel Injector 3 Control |
Fuel Injector 4 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | PK | 39 | Ignition 1 Voltage |
| B | L-BU/BK | 844 | Fuel Injector 4 Control |
Fuel Pump and Sender Assembly - Primary Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | GY | 120 | Fuel Pump Supply Voltage |
| B | PU | 1589 | Fuel Level Sensor Signal |
| C | BU | 930 | Fuel Level Sensor Signal - Common |
| D | BK | 850 | Ground |
Fuel Pump and Sender Assembly - Secondary Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | - | - | Not Used |
| B | BU | 930 | Fuel Level Sensor Signal - Common |
| C | BK/WH | 2759 | Low Reference |
| D | - | - | Not Used |
Fuel Tank Pressure (FTP) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | BK | 2759 | Low Reference |
| B | D-BN | 890 | FTP Sensor Signal |
| C | GY | 2709 | 5 Volt Reference - A |
Heated Oxygen Sensor (HO2S) 1 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | TN | 1667 | HO2S Low Signal Sensor 1 |
| B | PU | 1666 | HO2S High Signal Sensor 1 |
| C | D-GN | 676 | HO2S Heater Low Control Sensor 1 |
| D | WH | 5291 | Ignition 1 Voltage |
Heated Oxygen Sensor (HO2S) 2 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | TN/WH | 1669 | HO2S Low Signal Sensor 2 |
| B | PU/WH | 1668 | HO2S High Signal Sensor 2 |
| C | BK/WH | 1423 | HO2S Heater Low Control Sensor 2 |
| D | WH | 5291 | Ignition 1 Voltage |
Ignition Control Module (ICM) Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | PK | 39 | Ignition 1 Voltage |
| B | WH | 423 | IC Timing Control 1-4 |
| C-D | - | - | Not Used |
| E | BK/WH | 451 | Ground |
| F | BN/WH | 633 | Camshaft Position Sensor Signal |
| G | OG | 406 | IC Timing Control 2-3 |
| H-J | - | - | Not Used |
Intake Air Temperature (IAT) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | BK | 2760 | Low Reference |
| B | TN | 472 | IAT Sensor Signal |
Knock Sensor (KS) Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | D-BU | 496 | Knock Sensor Signal |
| B | GY | 1716 | Low Reference |
Manifold Absolute Pressure (MAP) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | OG/BK | 469 | Low Reference |
| B | L-GN | 432 | MAP Sensor Signal |
| C | GY | 2704 | 5 Volt Reference - B |
Throttle Actuator Control (TAC) Module Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit Number | Function |
| A | D-GN | 485 | TP Sensor 1 Signal |
| B | BK/WH | 1704 | Low Reference |
| C | GY | 2701 | 5 Volt Reference A |
| D | PU | 486 | TP Sensor 2 Signal |
| E | BN | 582 | TAC Motor Control 2 |
| F | YE | 581 | TAC Motor Control 1 |
| G | BK | 2752 | Low Reference |
| H | L-BU/BK | 1688 | 5 Volt Reference B |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
