2004 Saturn Ion Red LineFACTORY OEM SERVICE PROCEDURE

Engine Controls Component Views

WARNING: This page is about a different car, the 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Left Side Of Engine Component View (2.2L)
GM1504314Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Fuel Injectors Rail
2 Throttle Body
3 Manifold Absolute Pressure (MAP) Sensor
4 Ignition Control (IC) Module
5 Evaporative Emissions (EVAP) Canister Purge Solenoid Valve
6 G105 (2.0L Similar)
7 Crankshaft Position (CKP) Sensor
8 Knock Sensor (KS)
9 C150
Fig 2: Rear Side Of Engine Component View
GM897816Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Backup Lamp Switch (M86)
2 Engine Coolant Temperature Sensor (ECT)
3 Heated Oxygen Sensor (HO2S)1
4 Heated Oxygen Sensor (HO2S)2 Connector
Fig 3: Right Rear Side Under Vehicle Component View
GM897675Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 C406 (Fuel Controls)
2 C406 (EVAP Controls)
3 Evaporative Emission (EVAP) Canister Vent Solenoid
Fig 4: Right Front Side Of Engine Component View (2.2L)
GM897627Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Idle Air Control (IAC)
2 C150
3 Generator
4 Generator B+
5 Throttle Position (TP) Sensor
6 Intake Air Temperature (IAT)
Fig 5: Top Front Of Engine Component View
GM1540536Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Fuel Injector 1
2 Fuel Injector 2
3 Fuel Injector 3
4 Fuel Injector 4
Fig 6: Fuel Pump & Sender Assembly Component View
GM61866Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Fuel Tank Pressure (FTP) Sensor
2 Fuel Pump and Sender Assembly
3 Fuel Pump Strainer
4 Fuel Level Sensor
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.