2003 Saturn Vue 2.2 D, AWDFACTORY OEM SERVICE PROCEDURE

Throttle Position Sensor

NOTE: TP sensor is not adjustable. For further testing procedures, perform TP sensor related diagnostic test. See appropriate SELF-DIAGNOSTICS article.
THROTTLE POSITION SENSOR VOLTAGE

Application Volts
2.2L (1)
3.0L (2)
(1) TP sensor is 2 individual units within one housing. TP sensor 1 signal voltage range is 4.25 volts with throttle closed to 0.59 volt at wide open throttle. TP sensor 2 signal voltage range is from 0.75 volt with throttle closed to 4.41 volts at wide open throttle.
(2) TP sensor is 2 individual units within one housing. TP sensor 1 signal voltage range is 0.50 volt with throttle closed to 4.25 volts at wide open throttle. TP sensor 2 signal voltage range is from 4.45 volts with throttle closed to 0.70 volt at wide open throttle.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.