REPLACEMENT INTERVALS

Component

Miles

Air Filter ⁽¹⁾

30,000

Accessory Drive Belt

⁽²⁾

Automatic Transaxle Fluid

⁽³⁾ 100,000

Engine Coolant

⁽⁴⁾ 100,000

Fuel Filter

100,000

Manual Transaxle Fluid

⁽⁵⁾

Oil & Filter

⁽⁶⁾

Passenger Compartment Filter

12,000

Spark Plugs

100,000

Timing Belt (3.0L)

100,000

⁽¹⁾	Inspect and replace as needed every 15000 miles if used under severe service conditions.

⁽²⁾	Check and replace as necessary.

⁽³⁾	If used under severe service conditions, replace every 50,000 miles. Add DEX-CVT additive to VTi variable transmission.

⁽⁴⁾	Or every 5 years, whichever occur first. Use only DEX-COOL® coolant or equivalent silicate-free coolant.

⁽⁵⁾	Periodic replacement is not required. If used under severe service conditions, replace every 50,000 miles.

⁽⁶⁾	If used under severe conditions, replace every 3000 miles. If used under normal conditions, replace as indicated by "CHG OIL" light or every 6 months, whichever comes first.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Service Intervals & Specifications