2003 Saturn L300FACTORY OEM SERVICE PROCEDURE

Data Display/Definitions

The Scan Tool Data Display/Definitions contains a brief description of all the ABS data parameters. The menus available depend on the number and type of system on the vehicle and are listed below in alphanumeric order.

  • ABS DATA
  • TCS DATA
Battery Voltage

The scan tool will display the battery voltage at the EBCM.

Brake Lamp Switch

The scan tool will display Applied or Released depending on the state of the brake switch.

Delivered Engine Torque

The scan tool will display.

Engine Speed

The scan tool will display between 0 to 10200 RPM which is a digital tachometer display.

Left Front Wheel Speed

The scan tool displays 0-255 km/h or (0-158 mph). The scan tool displays the actual speed of the left front wheel.

Left Rear Wheel Speed

The scan tool displays 0-255 km/h or (0-158 mph). The scan tool displays the actual speed of the left rear wheel.

LF Inlet Valve Solenoid

The scan tool will display Apply or Released. The scan tool displays the commanded state of the LF inlet solenoid valve.

LF Outlet Valve Solenoid

The scan tool will display Apply or Released. The scan tool displays the commanded state of the LF outlet solenoid valve.

LF Valve Solenoid

The scan tool will display Apply or Released. The scan tool displays the commanded state of the LF solenoid valve.

LR Inlet Valve Solenoid

The scan tool displays Apply or Released. The scan tool displays the commanded state of the LR inlet solenoid valve.

LR Outlet Valve Solenoid

The scan tool displays Apply or Released. The scan tool displays the commanded state of the LR outlet solenoid valve.

LR Valve Solenoid

The scan tool will display Apply or Released. The scan tool displays the commanded state of the LR solenoid valve.

RF Inlet Valve Solenoid

The scan tool displays Apply or Released. The scan tool displays the commanded state of the RF inlet solenoid valve.

RF Outlet Valve Solenoid

The scan tool displays Apply or Released. The scan tool displays the commanded state of the RF outlet solenoid valve.

RF Valve Solenoid

The scan tool will display Apply or Released. The scan tool displays the commanded state of the RF solenoid valve.

Return Pump Motor Relay

The scan tool will display On or Off.

Right Front Wheel Speed

The scan tool displays 0-255 km/h or (0-158 mph). The scan tool displays the actual speed of the right front wheel.

Right Rear Wheel Speed

The scan tool displays 0-255 km/h or (0-158 mph). The scan tool displays the actual speed of the right rear wheel.

RR Inlet Valve Solenoid

The scan tool displays Apply or Released - The scan tool displays the commanded state of the RR inlet solenoid valve.

RR Outlet Valve Solenoid

The scan tool displays Apply or Released - The scan tool displays the commanded state of the RR outlet solenoid valve.

RR Valve Solenoid

The scan tool displays Apply or Released - The scan tool displays the commanded state of the RR solenoid valve.

TCS Switch State

The scan tool displays On or Off. The scan tool will display the state of the Traction Control Switch.

Valve Relay

The scan tool displays.

Valve Relay State

The scan tool will display On/Off depending on the state of the relay.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.