Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Description
The scan tool is first used to energize the fuel pump relay. The scan tool is then used to pulse each injector for a precise amount of time allowing a measured amount of fuel into the manifold. This causes a drop in system fuel pressure that can be recorded and used to compare each injector. See FUEL INJECTOR BALANCE TEST WITH TECH 2 EXAMPLE (TYPICAL) .
| Condition | Cylinder No. 1 | Cylinder No. 2 | Cylinder No. 3 | Cylinder No. 4 |
|---|---|---|---|---|
| 1st Reading | 55 psi (379 kPa) | 55 psi (379 kPa) | 55 psi (379 kPa) | 55 psi (379 kPa) |
| 2nd Reading | 31 psi (214 kPa) | 29 psi (200 kPa) | 30 psi (207 kPa) | 33 psi (228 kPa) |
| Amount Of Drop | 24 psi (165 kPa) | 26 psi (179 kPa) | 25 psi (172 kPa) | 22 psi (151 kPa) |
| Average Range: 22.5-25.5 psi (156-176 kPa) | Injector Okay | Replace Fuel Injector - Too Much Fuel Pressure Drop | Injector Okay | Replace Fuel Injector - Too Little Fuel Pressure Drop |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.