2003 Saturn L200 AutomaticFACTORY OEM SERVICE PROCEDURE

Installation Procedure

  1. Guide the control cable through the pass-through in the dash panel.
    Fig 1: Removing & Installing Shift Control Cable
    GM893234Courtesy of GENERAL MOTORS CORP.
  2. Secure the control cable grommet by pressing the cable into the pass-through hole in the dash panel.
  3. Route the control cable through the cable bracket on the powertrain mount, and secure the cable into the bracket.
    Fig 2: Removing & Installing Shift Control Cable From Transaxle Range Switch Lever
    GM893827Courtesy of GENERAL MOTORS CORP.
  4. Install the control cable retaining clip.
  5. Connect the control cable end to the control assembly lever.
    Fig 3: Removing & Installing Shift Control Cable Retaining Clip
    GM893834Courtesy of GENERAL MOTORS CORP.
  6. Connect the control cable to the pin on the control assembly.
  7. Secure the control cable into the control assembly by pushing into place.
  8. Install the control cable retaining clip.
  9. Install the console. Refer to Console Replacement .
  10. Adjust the control cable assembly. Refer to Shift Lock Control Cable Replacement .
  11. Enable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM in Air Bag Restraint Systems.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.