2002 Saturn SC2 Standard, MP2FACTORY OEM SERVICE PROCEDURE

Manual Transaxle/Transmission Fluid Capacity

FLUID CAPACITY (MANUAL TRANSAXLE/TRANSMISSION) (1)

Application Quantity Qts. (L)
"F" Body (2)
5-Speed 3.4 (3.2)
6-Speed 4.0 (3.8)
"J" Body (2)
Cavalier & Sunfire 1.8 (1.7)
Saturn ("L" Series) 2.0 (1.9)
"M" Body (3) 2.5 (2.4)
"N" Body (2) 2.6 (2.5)
"S" Body (3) 2.0 (1.9)
"Y" Body (2) 4.1 (3.9)
"Z" Body (4) 2.6 (2.5)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Dexron III.
(3) SAE 75W-90 GL-4 gear oil.
(4) Use Saturn transaxle fluid or Dexron-III.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.