Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Serial Data
PCM is equipped with a serial data line. Serial data is a stream of electrical impulses which can be interpreted by special testers or other control modules. On some models, serial data and codes must be accessed using a scan tool connected to the Data Link Connector (DLC). Update intervals and information contained within the data stream vary with model application.
On some models, serial data may be accessed using the Driver Information Center (DIC) and Climate Control Panel (CCP). On these models, serial data may be shared with A/C controller, supplemental restraint controller, anti-lock brake controller and even cruise control unit.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.