Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2000SL2 AUTOMATIC, MP6REPAIR AND DIAGNOSISENGINE MECHANICALFUEL SYSTEMREMOVAL AND INSTALLATIONFUEL FILL PIPEINSTALLATION
2000 Saturn SL2 Automatic, MP6
Fuel Fill Pipe: Installation
2000 Saturn SL2 Automatic, MP6SECTION Installation
- Raise vehicle to comfortable working height.
- Insure that fuel filler check valve is in place at the end of the fuel filler pipe.NOTE: To ease installation, lightly wipe the outside of the fuel tank inlet connector with plain water.
- Position filler pipe into wheel opening with top of pipe within body panel opening.
- Install fuel filler pipe into the fuel tank opening.
- Loosely install the filler pipe lower bracket attachment screw (10 mm hex) but do not tighten.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.