WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Select CLEAR DTCs function on scan tool. Clear current and history DTCs. Operate vehicle and recheck for DTCs.

DTC IDENTIFICATION

Code ⁽¹⁾

Description

B0605 ⁽²⁾

Receiver Internal Memory Malfunction

B2805 ⁽²⁾

No Transmitters Programmed

C2100 ⁽³⁾

Left Front TPM Sensor Malfunction

C2105 ⁽³⁾

Right Front TPM Sensor Malfunction

C2110 ⁽³⁾

Right Rear TPM Sensor Malfunction

C2115 ⁽³⁾

Left Rear TPM Sensor Malfunction

C2120 ⁽³⁾

TPM System Malfunction (No Sensors Received)

C2121 ⁽³⁾

TPM System Programming Malfunction (No Sensors Programmed)

U1000 & U1255 ⁽⁴⁾

Class 2 Communication Malfunction

U1001-U1254 ⁽⁴⁾

Loss Of Communication With XXX

U1300 ⁽⁴⁾

Serial Data Line Short To Ground

U1301 ⁽⁴⁾

Serial Data Line Short To Battery

⁽¹⁾	See appropriate diagnostic procedure under DIAGNOSTIC TESTS .

⁽²⁾	Remote Function Actuation (RFA) system DTC.

⁽³⁾	Tire Pressure Monitoring (TPM) system DTC.

⁽⁴⁾	See appropriate diagnostic procedure under DIAGNOSTIC TESTS in BODY CONTROL MODULES - CORVETTE article.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Using Scan Tool

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?