Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Memory Seats
Memory functions are controlled with buttons located in armrest of driver's door. Memory seat, outside mirror, climate control and stereo settings for up to 3 different drivers can be recorded into the seat control module through memory panel buttons.
To program seat control module, move seat to desired position. Depress and hold No. 1 memory button until indicator light above the memory button glows steady. Continue to hold button down. When position has been stored, light will flash once. To record second setting, repeat function and depress No. 2 button. For third setting, No. 1 and 2 buttons will need to be depressed simultaneously.
To recall a position, depress the button that corresponds with the setting you want recalled. Indicator light will flash until programmed position is achieved. Memory recall will not work if the vehicle is moving, the key is out of the ignition switch or if a seat or memory switch is being used.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.