System Check

2000 Saturn SC2 Automatic, MP6SECTION System Check
  1. With all windows closed, turn ignition switch to RUN position. Briefly press left front window switch to first detent. Window should descend a small distance, then stop.
  2. Press left front window switch past first detent. Window should descend completely (express mode).
  3. Press left front window switch up. Window should raise as long as switch is held up, then stop when switch is released (no express). Repeat step  2. While window is moving down in express mode, press switch upward. Window should stop express descent.
  4. Lower and raise other windows from master window switch assembly. All windows should operate quietly and smoothly through full range of travel.
  5. Lower and raise each window from window switches. All windows should operate quietly and smoothly through full range of travel. If problem exists with power window system, go to PRELIMINARY INSPECTION .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.