Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2000LW2 V6-3.0L VIN RREPAIR AND DIAGNOSISTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGCUSTOMER PROGRAMMABLE - CONTENT THEFT SYSTEM PROGRAMMING
2000 Saturn LW2 V6-3.0L VIN R
Customer Programmable - Content Theft System Programming
2000 Saturn LW2 V6-3.0L VIN RSECTION Customer Programmable - Content Theft System Programming
To enter programming mode:
Press PANIC button on transmitter four times in 5 Seconds with ignition On. BCM will chime notifying user they have entered the programming mode.
Then within 3 Seconds select mode by pressing LOCK, UNLOCK, OR TRUNK button.
Active - Content theft system will only be armed by using the transmitter to lock the doors.
Passive - Content theft system will arm 5 minutes after ignition is Off, all doors and trunk are closed. Any door open will reset 5 minute timer.
Disabled - No content theft system activated.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.