High Tension Wire Resistance

2000 Saturn LW2 AutomaticSECTION High Tension Wire Resistance
HIGH TENSION WIRE RESISTANCE

Application Ohms
1.0L & 1.3L Less Than 30,000
1.8L, 2.4L, 3.0L, 3.5L & 4.6L (1)
2.2L
"J" Body
Cavalier & Sunfire Less Than 30,000
Saturn ("L" Series) (1)
1.9L 1500-15,000
3.1L & 3.4L (2)
3.8L
"C" Body 7000 Or Less
"F" & "H" Bodies 1000-1500 Per Ft.
"W" Body 6000 Or Less
5.7L
"F" Body 1000-1500 Per Ft.
"Y" Body 700 Or Less
(1) Not equipped with high tension wires. Ignition coils are connected directly to spark plugs by boots.
(2) Replace wire if resistance exceeds 600 ohms per ft.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.