Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2000LS1 L4-2.2L VIN FREPAIR AND DIAGNOSISTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGREMOTE KEYLESS ENTRY (RKE) - TRANSMITTER
2000 Saturn LS1 L4-2.2L VIN F
Remote Keyless Entry (RKE) - Transmitter
2000 Saturn LS1 L4-2.2L VIN FSECTION Remote Keyless Entry (RKE) - Transmitter
Each transmitter is coded to prevent another transmitter from activating the RKE functions on another Saturn, as long as that particular transmitter has not been specifically programmed to that Saturn.
A transmitter can be programmed to as many different Saturns as a customer owns, as long as they have the power door lock option. Each Saturn can be programmed with up to four transmitters.
To program transmitters refer to the Tech 2 User Guide for information on using the "Program Key Fobs Special Function."
To program customer options refer to "RKE Customer Programmable Content Theft Programming".
A transmitter can be programmed to as many different Saturns as a customer owns, as long as they have the power door lock option. Each Saturn can be programmed with up to four transmitters.
To program transmitters refer to the Tech 2 User Guide for information on using the "Program Key Fobs Special Function."
To program customer options refer to "RKE Customer Programmable Content Theft Programming".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.