Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2000LS1 L4-2.2L VIN FREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGSPECIFICATIONS
2000 Saturn LS1 L4-2.2L VIN F
Heating and Air Conditioning: Specifications
2000 Saturn LS1 L4-2.2L VIN FSECTION Specifications
Pressure Transducer-to-Suction/Liquid Line 7 N.m
Splash Shield-to-Wheelhouse and Cradle Fasteners 5 N.m
TXV-to-Block Bolts 7 N.m
Filter Housing-to-HVAC Module Fasteners 3.5 N.m
Receiver/Dehydrator Block Bolts 3 N.m
Receiver/Dehydrator Clamp Bolt 5 N.m
Recirculation Actuator Bracket-to-Module Screws 1 N.m
Vent Primary Lever Fastener 1 N.m
Heater Primary Lever Fastener 1 N.m
Condensate Drain Tube Bolt 3.5 N.m
Upper and Lower Outer Beam Bolts 7 N.m
Upper and Lower Inner Beam Bolts 20 N.m
Splash Shield-to-Wheelhouse and Cradle Fasteners 5 N.m
TXV-to-Block Bolts 7 N.m
Filter Housing-to-HVAC Module Fasteners 3.5 N.m
Receiver/Dehydrator Block Bolts 3 N.m
Receiver/Dehydrator Clamp Bolt 5 N.m
Recirculation Actuator Bracket-to-Module Screws 1 N.m
Vent Primary Lever Fastener 1 N.m
Heater Primary Lever Fastener 1 N.m
Condensate Drain Tube Bolt 3.5 N.m
Upper and Lower Outer Beam Bolts 7 N.m
Upper and Lower Inner Beam Bolts 20 N.m
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.