Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2000LS1 L4-2.2L VIN FREPAIR AND DIAGNOSISCRUISE CONTROLCRUISE CONTROL SWITCHSERVICE AND REPAIR
2000 Saturn LS1 L4-2.2L VIN F
Cruise Control Switch: Service and Repair
2000 Saturn LS1 L4-2.2L VIN FSECTION Service and Repair
REMOVAL
1. Remove screws from steering wheel shroud.
IMPORTANT: Cruise control switches must be removed from rear. Do not attempt to pry them out from front as damage to steering wheel may occur.
2. Push switches out from rear of steering wheel.
INSTALLATION
1. Install switches pushing them in place from front of wheel.
2. Install steering wheel shroud.
1. Remove screws from steering wheel shroud.
IMPORTANT: Cruise control switches must be removed from rear. Do not attempt to pry them out from front as damage to steering wheel may occur.
2. Push switches out from rear of steering wheel.
INSTALLATION
1. Install switches pushing them in place from front of wheel.
2. Install steering wheel shroud.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.