Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Feature Customizing
UTD system functions may be customized to customer preference. Alarm mode can programmed to activate horn and lights (backup, turn signals, foglights) or horn only. System can be programmed to activate horn only, lights only or horn and lights when system is armed.
To program UTD system, turn ignition on. Press RESET button on Driver Information Center (DIC) until all warning messages are cleared from Instrument Panel Cluster (IPC) display. Press OPTIONS button until IPC displays LOCK & ARM. Press RESET button to choose UTD ARMING function. Options are HORN ONLY, LIGHTS ONLY, or HORN & LIGHTS. Press OPTIONS button again until IPC displays ALARM. Press RESET button to choose UTD ACTIVE function. Options are HORN or HORN & LIGHTS.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.