Engine Controls - Service & Adjustment Specifications: Capacities

1998 Saturn SC1 AutomaticSECTION Capacities
BATTERY SPECIFICATIONS

Application Cold Crank Amps @ 0Β°F (-18Β°C) Reserve Capacity Minutes
Saturn 525 85
FLUID CAPACITY (CRANKCASE) (1)

Application (2) Quantity Qts. (L)
Saturn 4.0 (3.8)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Includes oil filter capacity.
FLUID CAPACITY (COOLING SYSTEM) (1)

Application (2) Quantity Qts. (L)
Saturn 7.0 (6.6)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Includes heater.
FLUID CAPACITY (AUTOMATIC TRANSAXLE/TRANSMISSION) (1)(2)

Application (3) Quantity Qts. (L)
Saturn 4.2 (4.0)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Drain and refill capacity only. Does not include torque converter.
(3) Dexron-III or Dexron-IIE.
FLUID CAPACITY (MANUAL TRANSAXLE/TRANSMISSION) (1)

Application Quantity Qts. (L)
Saturn (2) 2.6 (2.5)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Dexron-III or Dexron-IIE.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.