Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN1998SC1 AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEMREMOVAL & INSTALLATIONABS MODULEREMOVAL
1998 Saturn SC1 Automatic
Abs Module: Removal
1998 Saturn SC1 AutomaticSECTION Removal
- ABS module is located under instrument panel top cover above steering column. ABS module is mounted on bracket next to Powertrain Control Module (PCM). Using screwdriver, carefully remove instrument panel top cover bolt caps. Remove 2 instrument panel top cover retaining screws. Carefully lift instrument panel top cover to disengage clips and remove top cover.
- Remove sound insulator. Loosen ABS module retaining nut. Lift ABS module upward and disengage from mounting bracket. Disconnect ABS module electrical connector and remove module from vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.