Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN1992SL2 AUTOMATICREPAIR AND DIAGNOSISQUICK LOOKUPSELECTRICAL COMPONENT LOCATIONSELECTRICAL COMPONENT LOCATORSWITCHES
1992 Saturn SL2 Automatic
Electrical Component Locator: Switches
1992 Saturn SL2 AutomaticSECTION Switches
SWITCHES LOCATION
| Component | Location | |
|---|---|---|
| Backup Lamp Switch | ||
| M/T | On top of steering column. | |
| A/T | Incorporated in Neutral Start Shift Selector Switch on top of steering column. | |
| Brake Fluid Level Switch | On master cylinder reservoir. | |
| Brake Switch | On brake pedal support. See Figure. | |
| Brake/Transmission Interlock Switch | Under center console, bottom of shift lever. | |
| Clutch/Cruise/Start Switch | On clutch pedal support. See Figure. | |
| Coolant Level Switch | In coolant reservoir. | |
| Neutral Start Shift Selector Switch (A/T) | On top of steering column. | |
| Neutral Start Switch (A/T) | On right rear of transaxle. | |
| Oil Pressure Sender/Switch (1.9L DOHC) | On right front of engine, above oil filter. See Figure & 3. | |
| Power Steering Pressure Switch (1.9L DOHC) | On power steering rack. See Figure & 3. | |
| Seat Belt Switch | On driver's side seat belt buckle assembly. | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.