Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1992 Saturn SL1 AutomaticFACTORY OEM SERVICE PROCEDURE
Mini-Fuse & Relay Identification (1993-94)
- 1 - 7.5 Amp (Brown) - Automatic Transaxle G2 Actuator
- 2 - Not Used
- 3 - 7.5 Amp (Brown) - Automatic Transaxle Torque Converter Clutch Actuator
- 4 - Not Used
- 5 - 10 Amp (Red) - Left Hand Headlamp Door Motor (Coupe Only)
- 6 - 10 Amp (Red) - Horn
- 7 - 15 Amp (Blue) - Brake Lights
- 8 - 7.5 Amp (Brown) - Automatic Transaxle G3 Actuator
- 9 - 7.5 Amp (Brown) - Automatic Transaxle HLP Actuator
- 10 - 7.5 Amp (Brown) - Automatic Transaxle I4 Actuator
- 11 - 7.5 Amp (Brown) - Air Conditioning System
- 12 - 25 Amp (Clear) - Rear Window Defogger
- 13 - 10 Amp (Red) - Hazard Flasher, Headlamp HI-Beam Indicator Light
- 14 - 5 Amp (Tan) - Anti-Lock Brake System Memory
- 15 - 7.5 Amp (Brown) - Distributorless Ignition System Module
- 16 - 5 Amp (Tan) - EGR Solenoid Canister Purge Solenoid
- 17 - Not Used
- 18 - Not Used
- 19 - Not Used
- 20 - 10 Amp (Red) - Right Hand Headlamp Door Motor (Coupe Only)
- 21 - 10 Amp (Red) - Right HI-Beam Headlamp, Right LO-Beam Headlamp (Sedan/Wagon), Right Hand HI/LO Beam Headlight (Coupe Only)
- 22 - 10 Amp (Red) - Back-up Lights
- 23 - 10 Amp (Red) - Low Coolant Level Switch, Fuel Injectors, Powertrain Control Module (Automatic Transaxle Only)
- 24 - 5 Amp (Tan) - Powertrain Control Module
- 25 - 5 Amp (Tan) - Powertrain Control Module Memory
- 26 - 7.5 Amp (Brown) - Left HI-Beam Headlight, Left LO-Beam Headlight (Sedan/Wagon), Left Hand HI/LO Beam Headlight (Coupe Only)
- 27 - 15 Amp (Blue) - Fog Lamps
- 28 - Not Used -
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
