Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Window System: Notes
The power window system is designed to open and close all of the side windows from a power window master switch assembly located in the console.
On the Sedan and Wagon models, the rear door windows may be controlled from switches located in each rear door. The left rear door switch will operate only the left rear window, and the right rear door switch will only operate the right rear window. The rear window door switches can also be disabled from the power window master switch assembly. The power window master switch assembly contains 5 switches: One switch each for control of the 4 windows and one rear window lockout switch to enable or disable, rear window operation from the rear window switches.
On the Coupe, the power window master switch assembly contains 2 switches: One switch for control of each of the 2 front windows.
On all models, the power window system is operational only when the ignition is in the run position.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.