Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSAAB20109-5REPAIR AND DIAGNOSISBODY & FRAMESEATSADJUSTMENT REPLACEMENTFRONT SEAT HEATER CONTROL MODULE REPLACEMENT (BASE)

2010 Saab 9-5

Front Seat Heater Control Module Replacement (Base)

2010 Saab 9-5SECTION Front Seat Heater Control Module Replacement (Base)

Fig 1: Identifying Front Seat Heater Control Module And Fastener

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Callout	Component Name
1	Front Seat Heater Control Fastener (Qty: 2) Refer to FASTENER CAUTION . Procedure Move the front seat full backward. Move the front seat in upper position. Turn OFF the ignition. Disconnect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION . Disconnect wiring harness connectors. Tighten 3, 5 Nm (31 lb in)
2	Front Seat Heater Control Module

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.