Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20109-5REPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESBUS AND DIAGNOSTICS COMMUNICATIONTECHNICAL DATAMOBILE TELEPHONE CONTROL MODULE SCAN TOOL INFORMATIONMOBILE TELEPHONE CONTROL MODULE SCAN TOOL DATA PARAMETERS
2010 Saab 9-5
Mobile Telephone Control Module Scan Tool Data Parameters
2010 Saab 9-5SECTION Mobile Telephone Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Battery Voltage | - | 11-14 V | The scan tool displays V. This is the current battery voltage. |
| Bluetooth Signal Strength | - | 0-20 dB | The scan tool displays the wireless devices (Bluetooth) reception field strength. |
| GSM Signal Strength | - | -113 to -51 dBm | The scan tool displays the Global System for Mobile Communications (GSM) signal strength. |
| Microphone Signal | - | 1-16 V | The scan tool displays the voltage level of the microphone power supply. |
| Phone Cradle to Vehicle Status | Cradle is connected | Connected | The scan tool displays the different aspects of the cradle status. |
| Cradle is not connected | Disengaged | ||
| Phone in Cradle | Phone in Cradle | Yes | The scan tool displays the status if a phone is connected in the cradle. |
| Phone not in cradle | No | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.